Fire-Rated Doors in Barrie
Labelled steel and wood fire doors for Barrie — supplied as complete assemblies with their frames and hardware, installed, inspected against NFPA 80 and repaired within the listing. From our shop at 14-1645 Bonhill Road, Mississauga.
Hollow metal doors and frames we've installed and serviced in Barrie — for Tamarco Contracting, Noor Ul Islam Barrie Mosque, Universal Contracting, Plas Tech Extrusions Ltd — among many more businesses here. Dependable people, quality products, since 1979.
Fire-rated door projects across Simcoe County and York Region
Hollow metal doors & frames
Artyan Group
Hollow metal doors & frames
New Apostolic Church Canada
Hollow metal doors & frames
Kingdom Construction Limited
Fire-Rated Doors across Barrie
We work throughout Barrie — Bayview Point Industrial Park, Cedar Pointe Business Park, 400 East Industrial Corridor, Mapleview Drive Corridor and the blocks around them. The buildings here are mostly health care and social assistance, advanced manufacturing and retail trade, and each puts different demands on a door: traffic volume, insurance and fire requirements, and how much downtime an opening can afford. Barrie’s 147,829 residents keep those buildings busy.
- Population
- 147,829
- Main industries
- health care and social assistance, advanced manufacturing, retail trade and educational services
- Building stock
- high-bay warehouses and logistics centres, multi-tenant light industrial plazas, manufacturing and heavy processing plants and big-box retail and power centres
- Business parks
- Bayview Point Industrial Park, Cedar Pointe Business Park, 400 East Industrial Corridor and Mapleview Drive Corridor
- Serving since
- 1979
- Bayview Point Industrial Park
- Cedar Pointe Business Park
- 400 East Industrial Corridor
- Mapleview Drive Corridor
- Park Place Node
Broken fire-rated doors in Barrie: we dispatch 24/7.
Barrie is roughly a 75-minute run from our Mississauga shop — less if a technician is already in the area. Planned work, measures and maintenance travel there without difficulty; on a middle-of-the-night emergency we will tell you the drive time on the phone, and what to do to make the opening safe until we arrive.
Emergency board-up, security and make-safe first — permanent repair scheduled after.
The two fire-rated doors a building in Barrie uses — steel and wood
A fire door is not a door with a rating written on it. It is a tested assembly — leaf, frame, hinges, closer, latch and any glazing — certified together by a body such as ULC or UL, and it performs as certified only while every part of it stays as it was listed. Which of the two materials goes into a given Barrie opening is settled by where the door sits in the building rather than by budget: steel where the door is a tool, mineral-core wood where the door is part of the interior.
Where a building in Barrie carries fire-rated openings
The rating belongs to the wall first. The Ontario Building Code assigns a fire-resistance rating to a fire separation, and the closure in it — the door — gets a matching rating. In Barrie that lands on the same handful of openings in almost every building, and the count is usually higher than the owner expects.
Related fire door work in Barrie
Fire-rated openings for the work Barrie buildings do
The sectors that dominate Barrie — health care and social assistance, advanced manufacturing, retail trade — each put fire-rated doors in different places.
Health care and social assistance
Smoke and fire compartments cut the floor plate into sections, and those doors have to work for a bed and a crash cart as well as for the separation. Cross-corridor pairs run on hold-opens tied to the alarm, and the finished wings take wood because the door is part of the ward.
Advanced manufacturing
The walls that carry a rating are the ones around the process area and the electrical room, and the doors in them are steel because the leaf is in a plant. The recurring finding is a fire-rated door propped open for airflow or cable runs — the legal version of that is a magnetic hold- open tied to the alarm.
Retail trade
A unit in a plaza or mall carries fire-rated openings the tenant never thinks about: the back-of-house door onto the service corridor, the stock-room separation, and the mall front itself, which on a fire-rated common area closes with a shutter or curtain on alarm rather than with the shopfront glass.
Educational services
Corridor and stair-lobby doors sit on the route everybody uses when the alarm sounds — which is the same route students lean on, wedge and slam. Buildings here span decades, so one corridor can hold three generations of assembly and the first job is establishing what is actually there.
Automotive supply chain
The separation here is between the racked floor and the office block: cross-corridor and office-entry doors in a fire-rated wall, and a shipping opening usually too wide for a leaf, which closes on a rolling fire shutter instead. What fails is a frame knocked out of line by a pallet truck until the latch stops throwing.
Food & pharma processing
The rating sits on the separation between production and the rest of the plant, and it has to survive washdown and a sanitation schedule. Gasketing painted over or torn out during cleaning is the commonest deficiency, and putting it back is a listing question rather than a maintenance one.
Get a fire-rated opening quoted in Barrie
Tell us the opening, the rating if you know it, and whether the frame is staying. If you are working from a deficiency list, send it — we quote from those every week. For urgent make-safe work, call 800-522-6825.
Common questions about fire-rated doors
What makes a fire door fail an inspection?
Almost always the things people do to make a door convenient. Held open with a wedge or a hook, painted over or missing labels, a closer removed or disconnected, a latch that does not throw, gaps at the frame outside the permitted range, holes drilled for a new lock or card reader, and glazing or kick plates that were never part of the listing. Fire and structural damage show up too, but the common failures are alterations, not accidents.
How often do fire doors have to be inspected in Ontario?
Monthly, and in full once a year. The Ontario Fire Code requires doors in fire separations to be inspected monthly and kept in working order, with any deficiency corrected. NFPA 80 adds a full inspection and test of every assembly at least once a year, documented and kept on site — it sets out what has to be checked and what counts as a failure. Our inspection page covers what that visit involves.
Can you repair a fire door, or does it have to be replaced?
Many deficiencies are repairable within the listing — replacing a closer or latch with a certified equivalent, refitting hardware, correcting clearances, repairing a frame, and re-labelling in some cases. What cannot be repaired is an unauthorised field modification: a hole cut for a lock, a lite kit added after the fact, or a leaf cut down to fit a new floor. Those are replacement, because there is no legitimate way to restore the listing.
Fire-Rated Doors nearby
Full product details: Fire-Rated Doors