Patio Door Repair in Richmond Hill
Sliding patio doors that drag, jump the track, will not lock or have fogged between the panes — rollers, tracks, locks and glass units replaced on the door you already have, across Richmond Hill, from our shop at 14-1645 Bonhill Road, Mississauga.
Door work we've done in Richmond Hill — for Mansteel Rebar LTD, GMC Solutions, GAMA Corp, Property Wright, M&M Food Market, York Dermatology Clinic and Research Centre — among many more businesses here. Dependable people, quality products, since 1979.
Patio Door Repair across Richmond Hill
We repair patio doors in houses, townhouses and condos across Richmond Hill — Oak Ridges, Bayview Hill, Mill Pond, Jefferson and the streets around them. Most of the sliding doors we see are builder-grade aluminum or vinyl units, and on those the rollers and the lock wear out long before the frame does.
- Population
- 202,022
- Neighbourhoods
- Oak Ridges, Bayview Hill, Mill Pond and Jefferson
- Serving since
- 1979
- Oak Ridges
- Bayview Hill
- Mill Pond
- Jefferson
- Westbrook
- Richvale
- South Richvale
Broken patio door in Richmond Hill: we dispatch 24/7.
Richmond Hill is roughly a 40-minute run from our Mississauga shop — less if a technician is already in the area — so a truck is usually on site the same day.
Emergency board-up, security and make-safe first — permanent repair scheduled after.
Broken patio door glass in Richmond Hill
A cracked or shattered pane is the patio door call we get most. The frame, rollers and lock are usually fine, so only the glass unit is replaced — in the door you already have.
Made safe first
After a break-in we come out overnight — to Oak Ridges, Bayview Hill or anywhere else in Richmond Hill — clear the glass and board up the opening so the house can be locked. A crack that still holds waits for a daytime visit.Measured for a new unit
Patio door glass is tempered, usually a double-glazed sealed unit. The new one is made to your panel's size, with Low-E and gas fill if the original had them.Fitted into your existing panel
One visit to measure, one to fit. With the panel out, we check the rollers and weatherstrip too.Don't slide a cracked panel: tempered glass can break all at once. Keep it closed and call us.
Aluminum or vinyl — what the frame changes about a patio door repair in Richmond Hill
Most sliding patio doors in Richmond Hill houses have either an aluminum frame or a vinyl one. The parts that wear out are the same kind of part on both. The frame decides how those parts are adjusted, which of them wear out first, and at what point the door is no longer worth repairing.
Fix a dragging or sticking patio door in Richmond Hill
After a break-in, or if the door will not lock or the glass is broken, call 800-522-6825 — the line is answered 24 hours and we come out overnight to board it up. For a door that drags, grinds, jumps the track, drafts or has fogged between the panes, tell us what it is doing, whether the frame is aluminum or vinyl, and whereabouts in Richmond Hill you are. A photo of the bottom corner of the sliding panel helps us bring the right rollers.
Common questions about patio door repair
Do you repair patio doors you did not install?
Yes. Most of the patio doors we repair were fitted by a builder or by another company. What decides whether we can repair a door is whether its parts can still be matched, not who installed it. If a series has been discontinued, a compatible roller or lock usually exists. When one does not, we will tell you before any work starts.
My patio door will not lock. Is that urgent?
If the house cannot be secured, yes. Call us, because a door that will not lock is an open door, and after a break-in we come out overnight to board it up. Often the cause is a keeper on the frame that has moved out of line, and a technician can adjust it in minutes. Sometimes it is a panel that has dropped, so the latch no longer reaches the keeper. Otherwise the lock mechanism itself has worn out and is replaced. In the meantime, a bar or a length of dowel laid in the track stops the panel from sliding.
Can you replace the rollers on a patio door?
Yes, and it is one of the most common patio door repairs we do. The sliding panel is lifted out of the frame, the old rollers are taken out of the bottom rail, and rollers of the right size and weight rating are fitted. The panel then goes back in and is adjusted until it runs level. Rollers are not universal, because each make of door uses its own housing. The make or series of your door, or a photo of the old roller, helps us bring the right part.
Patio Door Repair nearby
Full product details: Patio Door Repair